xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
To display the parameters for a specific command:
DES-3400:4# config stp
Command:? config stp
config stp mst_config_id
Command: config stp
Usage: {maxage <value 6-40> | maxhops <value1-20> | hellotime <value 1-
10> | forwarddelay <value 4-30> | txholdcount <value 1-10> | fbpdu [enable |
disable] | lbd [enable | disable] | lbd_recover_timer [0 | <value 60-1000000>]}
Description: Used to update the STP Global Configuration.
config stp instance_id
config stp mst_ports
config stp ports
config stp priority
config stp version
DES-3400:4#
config command_history
Purpose Used to configure the command history.
Syntax
config command_history <value 1-40>
Description This command is used to configure the command history.
<value 1-40> − The number of previously executed commands
maintained in the buffer. Up to 40 of the latest executed
commands may be viewed.
Restrictions Only administrator-level users can issue this command.
Parameters
Example usage
To configure the command history:
DGS-3400:4#config command_history 20
Command: config command_history 20
Success.
DGS-3400:4#
show command_history
Purpose Used to display the command history.
Syntax
show command_history
Description This command will display the command history.
Parameters None.
Restrictions None.
Example usage
To display the command history:
238
To Next Page
Loading...
