D-Link xStack DGS-3450 - Page 26

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Example usage:
To display the configuration of all ports on a standalone switch, with description:
DGS-3400:4#show ports description
Command: show ports description
Port Port Settings Connection Address
State Speed/Duplex/FlowCtrl Speed/Duplex/FlowCtrl Learning
------ -------- --------------------- --------------------- --------
1 Enabled Auto/Disabled Link Down Enabled
Description: dads1
2 Enabled Auto/Disabled Link Down Enabled
Description:
3 Enabled Auto/Disabled Link Down Enabled
Description:
4 Enabled Auto/Disabled Link Down Enabled
Description:
5 Enabled Auto/Disabled Link Down Enabled
Description:
6 Enabled Auto/Disabled Link Down Enabled
Description:
7 Enabled Auto/Disabled Link Down Enabled
Description:
8 Enabled Auto/Disabled Link Down Enabled
Description:
9 Enabled Auto/Disabled Link Down Enabled
Description:
10 Enabled Auto/Disabled Link Down Enabled
Description:
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
23