xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
delete snmp group
Purpose
Used to remove an SNMP group from the Switch.
Syntax delete snmp group <groupname 32>
Description
The delete snmp group command is used to remove an SNMP
group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DGS-3400:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DGS-3400:4#
show snmp groups
Purpose
Used to display the group-names of SNMP groups currently configured on
the Switch. The security model, level, and status of each group are also
displayed.
Syntax show snmp groups
Description
The show snmp groups command displays the group-names of SNMP
groups currently configured on the Switch. The security model, level, and
status of each group are also displayed.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To display the currently configured SNMP groups on the Switch:
DGS-3400:4#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group Name : initial
ReadView Name : restricted
WriteView Name :
Notify View Name : restricted
Security Model : SNMPv3
Security Level : NoAuthNoPriv
Group Name : public
ReadView Name : CommunityView
WriteView Name :
Notify View Name : CommunityView
Security Model : SNMPv1
Security Level : NoAuthNoPriv
Group Name : public
36
To Next Page
Loading...
Need help?
General