xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#show log
Command: show log
Index Date Time Log Text
----- ---------------- ----------- ----------------------------------------------------
5 2006-04-26 09:38:18 Successful login through Console (Username: Anonymous)
4 2006-04-26 09:36:20 System started up
3 2006-04-25 12:38:18 Port 1 link up, 100Mbps FULL duplex
2 2006-04-25 12:38:00 Spanning Tree Protocol is disabled
1 2006-04-25 12:37:42 Configuration saved to flash (Username: Anonymous)
DGS-3400:4#
enable syslog
Purpose Used to enable the system log to be sent to a remote host.
Syntax
enable syslog
Description The enable syslog command enables the system log to be sent to
a remote host.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To the syslog function on the Switch:
DGS-3400:4#enable syslog
Command: enable syslog
Success.
DGS-3400:4#
disable syslog
Purpose
Used to enable the system log to be sent to a remote host.
Syntax disable syslog
Description
The disable syslog command enables the system log to be sent to a
remote host.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable the syslog function on the Switch:
DGS-3400:4#disable syslog
Command: disable syslog
Success.
DGS-3400:4#
58
To Next Page
Loading...
