Inter lock function
Two or more EP102 panels can communicate with each other and send interlocks and start signals
between the gates.
Attention
• Commissioning and function tests for each gate shall be carried out according to section
“Commissioning”, before the parameters are set between the gates.
• Program version 1.03 or later is required for inter lock functions.
• The program has a memory for opening but not for closing.
Heat Lock.
You can have a heat lock by letting only one door open at a time. A signal opens the first door, which
closes automatically. When the first door is closed it opens the second door.
Draught exclusion in a building with two doors.
Doors can be interlocked so that only one door can be opened at a time.
Entrance with barrier and gate operating together.
Barriers open and close rapidly but have a low level of security. A gate has higher security but takes
longer to open and close. By combining both these elements you can achieve high security along with
speedy passing.
To Next Page
Loading...