To Next Page

To Previous Page

8. Setting Modes

8-1. Types of Setting mode & Set-up

For setting mode, there are 4 different types of mode such as Function mode, Digital

calibration mode, Actual load calibration mode and SPAN constant calibration mode.

Mesuring mode

While key is being

Press, press key

Function mode

END

①

Digital calibration

mode

END

②

END

③

Actual load

calibration mode

① Function mode

Access to each function setup mode. Please refer 8-2 function mode.

② Digital calibration mode

It is to calibrate into the sensor’s output value. No need to prepare for the actual

load (stand weight). Please refer 8-3 how to calibrate.

③ Actual load calibration mode

It is to calibrate by adding the actual load (standard weight or the load you know).

Please refer 8-4 how to calibrate.

④ SPAN constant calibration mode

It is to calibrate with the S.CAL value written down for load calibration. Please

refer 8-5 how to calibrate.

END

④

SPAN constant

calibration mode

dacell DN-130L User Manual

Questions and Answers: