dacell DN-130L - Digital calibration (Calibration by sensor output value)

21
8-3. Digital calibration (Calibration by sensor output value)
At the time of purchasing sensor, the rated capacity (R.C) and rated output (R.O)
declared on the calibration sheet can be used for the calibration for easier calibration.
Mesuring mode
While key is being press, press key
Display Function mode
Display Sensor output value calibration mode
Select Channel 1, or 2
Display R.O. value input mode
Display R.C. value input
mode
Input the rated output value by using and
key. And then. Press key
Calibration end
Input the rated output value by using and
key. And then. Press key