dacell DN-130L - Specification; Output; Power Supply

5
3. 사양
 Available sensor
Strain Gauge sensor (Bridge 120, 350, 700)
 Upper limit Display : -19999 ~ +99999
 A/D Converter: 24bit, 500 times/sec
 D/A Converter : 16bit
 Temperature Characteristic (Amp Characteristic)
Zero : 0.5μV/℃
Span : 50ppm/℃
 Front Panel
Measured value display: 7 segment 5 Digit, Character Height 14mm
Status display : Red LED 6 pcs
Key Switch : 4 pcs
 Output
Comparison output : Upper limit(HI), Lower limit(LO)
Contact Capacity - AC 125V 0.5A/ DC 24V 1A
Analog Output : DC 0~10V (4~20mA available by internal operation)
• Temperature Range : -10℃∼60℃, less than 80% RH (no dewing.)
 External dimension : 97 × 97 × 141 mm (W × H × D)
 Panel cutting size : 92.5 × 92.5 mm
 Temperature Range : About 650g
 Power Supply : AC 85~265V 50/60Hz free voltage
 Option : RS232C (OP-02), RS485 (OP-03)