Page 9-15
SECTION 9 - COMPONENT REPAIR
Manifolds and Valves
Turn off the gas supply and power to the
range at the junction or fuse box.
Remove the spill trays. See the Removing the
Spill Trays section on page 8-7.
Remove the torx head screws from the end
caps
F through the access holes G on the
bottom of the front panel lip
H .
•
•
•
Cooktop Component Repair (continued)
C
Remove the end cap.•
Pull the all the knobs off the front of the
range.
Remove the side panel screw inside the front
panel lip.
•
•
Remove the screws from the bottom of the
cooktop front panel
C .
•
F
G
H
To Next Page
Loading...
