2 | QB1 User Manual
Conformity
Safety and CE mark
Dado Lab declares the instrument is in compliance
with the following standard:
Low voltage instruments directive BT 2014/35/UE
Directive 2011/65/UE ROHS - Restriction of
Hazardous Substances Directive
Directive EMC 2014/30/UE for the electro-mag-
netic compatibility (EMC)
Machinery Directive 2006/42/EC
Sampling Methods
Dado Lab declares that the instrument is compli-
ant to the following standards and methods for the
sampling.
Workplace atmospheres
UNI EN ISO 13137:2015
Pumps for the sampling of chemical agents with a
volume ow rate of over 5 l/min. Requirements and
test methods
Stack Emission
UNI EN 13284-1:2017
Stationary source emissions – Determination of low
range mass concentration of dust – Part 1: Manual
gravimetric method.
UNI EN 1911
Stationary source emissions - Determination of
mass concentration of gaseous chlorides expressed
as HCl - Standard reference method
UNI EN 14385
Stationary source emissions – Determination of the
total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb,
Sb, Tl and V
UNI EN 13211
Stationary source emissions. Manual method of
determination of the concentration of total mercury
CEN/TS 13649:2014
Stationary source emissions. Determination of the
mass concentration of individual gaseous organic
compounds. Activated carbon and solvent desorp-
tion method.
Environment
UNI EN ISO 16000-7
Indoor air - Part 7: Sampling strategy for determi-
nation of airborne asbestos bre concentrations.
To Next Page
Loading...