D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Printed in Jan. 2001 PS-MMA0415-E1A
FOREWORD
This maintenance manual is designed to serve as a reference for DAEWOO Heavy
Industries Ltd's (here after DAEWOO’s) customers and distributors who wish to gain basic
product knowledge on DAEWOO's D1146, D1146TI and DE08TIS Diesel engine.
This economical and high-performance diesel engine (6 cylinders, 4 strokes, in-line, direct
injection type) has been so designed and manufactured to be used for the overland transport
or industrial purpose. That meets all the requirements such as low noise, fuel economy, high
engine speed, and durability.
To maintain the engine in optimum condition and retain maximum performance for a long
time, CORRECT OPERATION and PROPER MAINTENANCE are essential.
In this manual, the following symbols are used to indicate the type of service operations to be
performed.
Removal Adjustment
Installation Cleaning
Disassembly Pay close attention-Important
Reassembly Tighten to specified torque
Align the marks Use special tools of manufacturer's
Directional Indication Lubricate with oil
Inspection Lubricate with grease
Measurement
During engine maintenance, please observe following instructions to prevent environmental
damage;
z Take old oil to an old oil disposal point only.
z Ensure without fail that oil and diesel fuel will not get into the sea or rivers and
canals or the ground.
z Treat undiluted anti-corrosion agents, antifreeze agents, filter element and
cartridges as special waste.
To Next Page
Loading...
Need help?
General
