Daewoo D1146 - Intake Manifold

D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
39
Printed in Jan. 2001 PS-MMA0415-E1A
3.1.23. Intake manifold
z Unscrew the intake manifold fixing bolts
and remove the intake manfold from the
cylinder head.
z Disassemble the intake manifold gasket
and discard it.
3.1.24. Cooling water pipe
z Unscrew the cooling water pipe fixing
bolts and remove the cooling water pipe
from the cylinder head.
z Remove the cooling water pipe gasket
and finish the surface with a scraper.
CAUTION :
Be sure that piece of the gasket do
not come into the cooling water
passage.
3.1.25. Rocker arm
z Remove the rocker arm bracket fixing
bolts in reverse order (zigzag method) of
assembling and disassemble the rocker
arm.
z Take out the push rod upwards.
z Disassembly of rocker arm assembly
- Remove the snap ring fron the both
ends of rocker arm shaft by means of a
plier.
- Remove the washer, rocker arm,
bracket and spring from the rocker arm
shaf in sequence.
- Press out the rocker arm bush.
G1088
Air heate
r
Intake manifold
G1056