G424 Service Manual Base Engine Service Procedure153
9EN0094
6EN0591
M Oil pressure switch installation
Specified sealant: 3M
TM
AAD Part No. 8672 or equivalent
Caution:
1) Keep the end of threaded portion clear of sealant.
2) Avoid an over tightening.
N Oil filter installation
(1) Clean the installation surfaces of the filter bracket.
(2) Apply engine oil to the o-ring of oil filter.
(3) Screw the oil filter in until the o-ring contacts the
bracket.
Sealant
Engine Oil
Bracket side
To Next Page
Loading...
Need help?
General
