Daewoo LM32L1 - PC Connection; When Connecting with PC Cable

PC
Connection
18
OUTPUT
UP-GRADE
PORT
AV1
Pr
R AUDIO L
R AUDIO L VIDEO
Pb Y
COMPONENT
OPTICAL
HDMI
3
PC
HDMI
2
HDMI
1
INPUT
PC AUDIO
1. First adjust resolution of the PC. (Refer to table in page 17.)
2. Connect between PC and TV set using the D-sub and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. select PC mode by pressing “MULTIMEDIA” button on the remote control or
” ” button of the TV
set.
OUTPUT
UP-GRADE
PORT
AV1
Pr
R AUDIO L
R AUDIO L VIDEO
Pb Y
COMPONENT
OPTICAL
HDMI
3
PC
HDMI
2
HDMI
1
INPUT
PC AUDIO
1. First adjust resolution of the PC. ((Refer to table in page 17.)
2. Connect between PC and TV set using the HDMI and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4.
select HDMI mode by pressing “MULTIMEDIA” button on the remote control or
”” button of the TV
set.
When connecting with PC(D-Sub) cable.
When connecting with a HDMI cable.
Note : If the graphic card of the PC only supports a DVI signal, you must connect the Audio cable as shown in the
picture upper.
TV
TV