Attendance Configuration on SmartPSS 32
Click at the bottom left corner of the interface. Step 4
The Shift Select interface is displayed. See Figure 4-19
Shift select Figure 4-19
Click at the top right corner of the interface. Step 5
And then you can set attendance shift, start time, and end time for the user you have
selected.
Set attendance shift Figure 4-20
Double-click the attendance shift names, start time, and end time, and then you can
select attendance shifts, set start time and end time.
Click OK. Step 6
The attendance shift of the user or users you selected will be displayed on the
attendance interface. See Figure 4-21.
To Next Page
Loading...
