21
USB 3.10
Make sure that the USB is inserted before exporting user information and updating. During
exporting or updating, do not pull out the USB or do other operations; otherwise the
exporting or updating will fail.
You need to import information from one standalone to the USB before using USB to
import information to another standalone.
USB can also be used to update the program.
3.10.1 USB Export
You can export data from the standalone to the USB after inserting the USB. The exported
template is in .xml format, and you can edit user information and import it to the standalone.
The first three pieces of information are encrypted and cannot be edited.
Only the FAT32 file system is supported.
Select USB > USB Export. Step 1
The USB Export interface is displayed.
USB export Figure 3-14
Select the data type that you want to export. Step 2
The prompt Confirm to export is displayed.
Tap OK. Step 3
Data exported will be saved in the USB.
To Next Page
Loading...
Need help?
General
