32
4.6.1 Time Section
After setting the period, users can only unlock the door in the periods that you have set.
Select Time Section > Time Section. Step 1
Time section Figure 4-12
Click Add. Step 2
Add period Figure 4-13
Set the period number and time section name. Select the Enable check box, and the Step 3
time section as needed.
You can configure 128 periods (weeks) whose number range is 0–127, and set four
periods on each day of a period (week). The default is 255, which indicates that the
period is not configured; 0–127 is the period configured manually. You can edit the
configured period in the User List on the standalone.
To Next Page
Loading...
Need help?
General
