Dahua DH-XVR5108C-X User Manual

Local Configurations 221
Parameter
Description
Tour
Select the check box to enable a tour of the selected channels.
To use this function, make sure the tour is enabled and configured
in Main Menu > DISPLAY > TOUR.
Voice Prompts
Select to enable audio broadcast/voice prompts in response to a
temperature alarm event.
More Setting
Show Message: Select the Show Message check box to

enable a pop-up message in your local host PC.
Buzzer: Select the check box to activate a buzzer noise at the

Device.
Video Matrix: Select the check box to enable the function.

When an alarm event occurs, the video output port outputs the
settings configured in "Main Menu > DISPLAY > TOUR."
Not all models support this function.
Send Email: Enable the system to send an email notification

when an alarm event occurs.
To use this function, make sure the email function is enabled in
Main Menu > NETWORK > EMAIL.
Log: Select the check box to enable the Device to record a

local alarm log.
Select the check box to enable the function. When an alarm

event occurs, the extra screen outputs the settings configured
in Main Menu > DISPLAY > TOUR > Extra Screen.
Not all models support this function.

To use this function, extra screen shall be enabled.

Table 5-53
Click Save to save the settings. Step 4
5.12.2.4.2 Configuring Alarm Settings for Humidity Data
You can configure the alarm event by setting the humidity data.
On the main interface, select IoT > MANAGER > Temperature/Humidity.
Step 1
The Temperature/Humidity interface is displayed. See Figure 5-187.

Dahua DH-XVR5108C-X Specifications

General

Brand	Dahua
Model	DH-XVR5108C-X
Category	DVR
Language	English