Device Debugging 23
Figure 5-1
Enter “Password” and “Confirm Password”, and click “Next”.
The system displays "step two", as shown in Figure 5-2.
This password is used to login WEB interface. It shall be at least 8 characters, and shall
include at least two types of number, letter and symbol.
Figure 5-2
Select “Email” and enter your Email address. This Email address is used to reset the
password, so it is recommended that it should be set.
Click “Next”.
The system displays “OK” interface, as shown in Figure 5-3, and shows “Success”
To Next Page
Loading...
Need help?
General
