Dahua Digital VTH Series User Manual

Interface Operation 50
Figure 6-10
Press to enable alarm output function, and the icon becomes .
6.2.4 Mode Setting
Set area on/off status under different modes.
Area mode can be set only in disarm status.
Press [Setting].
The system pops up “Password” prompt box.
Input login password and press [OK].
Default login password is 123456. Please refer to “6.2.6.3 Password Setting” for
details.
Press [Mode].
The system displays “Mode” interface, as shown in Figure 6-11.

Dahua Digital VTH Series Specifications

General

Brand	Dahua
Model	Digital VTH Series
Category	Intercom System
Language	English