153
Figure 4-18
Step 5 Click Start live preview to view real-time video.
4.1.4.4 Smart Add
Note
The following figure appears if you check the box to enable smart add function on the startup wizard.
When the network camera(s) and the device are in the same router or switch, you can use smart add
function to add network cameras to the device.
Please follow the steps listed below.
Step 1 Click Next,
Enter the following interface. See Figure 4-19.
Note
On the preview interface, right click mouse and then select Smart add.
On the Smart add mode, the connected camera uses NVR password and email information
by default.
To Next Page
Loading...
Need help?
General
