Dahua Lite NVR2104-4KS2 - Page 362

361
Figure 5-32
Please refer to the following sheet for detailed information.
Parameter
Function
Mode
There are two modes: static mode and the DHCP mode.
 The IP/submask/gateway are null when
you select the DHCP mode to auto
search the IP.
 If you select the static mode, you need to
set the IP/submask/gateway manually.
 If you select the DHCP mode, you can
view the IP/submask/gateway from the
DHCP.
 If you switch from the DHCP mode to the
static mode, you need to reset the IP
parameters.
 Besides, IP/submask/gateway and
DHCP are read-only when the PPPoE
dial is OK.
Mac Address
It is to display host Mac address.
IP Version
It is to select IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
IP Address
Please use the keyboard to input the corresponding number to
modify the IP address and then set the corresponding subnet
mask and the default gateway.
Preferred DNS
DNS IP address.
Alternate DNS
Alternate DNS IP address.
For the IP address of IPv6 version, default gateway, preferred DNS and
alternate DNS, the input value shall be 128-digit. It shall not be left in blank.