Dahua VEC0404HD-M70 - Page 107

102
Figure 4- 30
Please see Figure 4-37.
 Slot: Select slot to configure RS232.
 Channel: Select channel to configure RS232.
 Communication: Serial type as RS232, RS422 and RS485. RS422 and RS485 are for alarm
card only.
 Function:Select corresponding COM protocol.
 Data bit: You can select 5 to 8.
 Baud rate: Select corresponding baud rate.
 Parity: There are four parities.
System default COM is console; baud rate is 115200; data bit is 8; stop bit is; and parity is none.
 Address: Set address.
4.2.3.5 Network