53
3.2.4.5.5 UPNP
Figure 3- 44
The UPNP protocol is to establish a mapping relationship between the LAN and the WAN.
Please see Figure 3- 44.
UPNP on/off ：Turn on or off the UPNP function of the device.
Status: Display UPNP function status, including success, fail and searching.
Router LAN IP: It is the router IP in the LAN.
WAN IP: It is the router IP in the WAN.
PAT table：Display info of added ports.
You may add new port and delete existing port.
Note: Double clicke item; you can change the corresponding mapping information.
Please see Figure 3- 45.
Figure 3- 45
3.2.4.5.6 Email
To Next Page
Loading...
