87
Figure 4- 8
Please see Figure 4- 7 and Figure 4- 8.
Auto scan: Select left border of camera auto scan via direction buttons, and click left border
button to confirm. It is same for right border.
Preset: Rotate the camera to designated position via direction buttons. Input preset value in
corresponding box, and click add button to save.
Auto tour: Input auto tour path value in point-to-point auto tour box. Input preset value in
correspond box and then click add button. You may repeat this process to add multiple presets.
You may delete preset by clicking on delete button.
Pattern: You may record down the above operations as Pattern X by click start to record button.
Then you should refer to Figure 4- 7 to perform zooming, focusing, iris, direction and etc. You
can stop recording by pressing stop button.
Assistant: select one item on assistant list and then click start or stop button. Please see Figure
4- 9.
Figure 4- 9
Matrix: It includes monitor output, video input, matrix ID and video switch.
To Next Page
Loading...
