88
Light Wiper: Remote control over light and wiper.
On: Select speed dome image, click ON to overlay.
Off: Turn off overlay.
Up/down/left/right: Select menu item.
7 Image/Other Settings
Image setting: select one channel with green box and you may set the brightness, contrastness,
hue, and saturation. Please see Figure 4- 10.
Figure 4- 10
Other settings:
1) Click snapshot path or record path button to modify storage path. Please see Figure 4- 11.
Figure 4- 11
2)Click reboot device. You will see a pop-up box as in the left picture in Figure 4- 12 and click OK
to reboot.
Note: Before you reboot please be notified: 1. You must have authority to reboot
device; 2. There is no other users logging in system menu locally.
If someone is logging in system menu or you do not have the authority, you will see
the following box as in the right picture in Figure 4- 12.
Figure 4- 12
To Next Page
Loading...
