Device Installation 15
4 Device Installation
Installation Flow Chart 4.1
VTH installation flow chart is shown in Figure 4-1 Please install VTH in the following steps.
Figure 4-1
For cable connection, please refer to “2.2 Rear Panel Port“.
For device installation, please refer to “4.4 Device Installation“.
Open-case Inspection
4.2
Please carry out open-case inspection when receiving the device. Please timely contact our
after-sales service personnel in case of any problems.
Inspect whether there are obvious damages.
Inspect whether there are accidental impacts.
Inspect whether fittings are complete.
Inspect whether it is consistent with order
contract.