Interface Operation 62
6.3.6 Reset MSG
Modify the bonded Email.
Press [Setting] for over 6 seconds. Step 1
The system pops up “Password” prompt box.
Enter the password set during initialization, and press [OK]. Step 2
Press [Reset MSG]. Step 3
The system displays “Reset MSG” interface, as shown in Figure 6-26.
Figure 6-26
Enter “New Email” and press [OK]. Step 4
The Email will obtain security code during password resetting. For details, please refer to “6.3.1
Forget Password“.
Call 6.4
Manage contact, call users and view the latest call log.
6.4.1 Contact
Add and edit VTH and extension number.
Select “Call > Contact”, and the system displays “Contact” interface, as shown in Figure 6-27.
To Next Page
Loading...
Need help?
General
