Daikin Altherma 3 H MT W - Mounting the Indoor Unit; About Mounting the Indoor Unit; Precautions When Mounting the Indoor Unit; To Install the Indoor Unit

7 | Unit installation
Installer reference guide
81
EPRA08~12EAV3+W1 + ETBH/X12EF6V+9W
Daikin Altherma 3 H MT W
4P634885-1 – 2021.03
7.4 Mounting the indoor unit
7.4.1 About mounting the indoor unit
Typical workflow
Mounting the indoor unit typically consists of the following stages:
1 Installing the indoor unit.
7.4.2 Precautions when mounting the indoor unit
INFORMATION
Also read the precautions and requirements in the following chapters:
▪ "2General safety precautions"[410]
▪ "7.1Preparing the installation site"[465]
7.4.3 To install the indoor unit
1 Fix the wall bracket (accessory) to the wall (level) with 2× Ø8mm bolts.
2×
a
a Optional: If you want to fix the unit to the wall from inside the unit, provide an
additional screw plug.
2 Lift the unit.
42 kg
3 Attach the unit to the wall bracket:
▪ Tilt the top of the unit against the wall at the position of the wall bracket.
▪ Slide the bracket on the back of the unit over the wall bracket. Make sure
the unit is fixed properly.