Daikin Altherma 3 M - Page 135

11 | Configuration
Installer reference guide
135
EBLA09~16DA + EDLA09~16DA
Daikin Altherma 3 M
4P620241-1 – 2020.06
You can… See…
Consult which schedule is currently
selected.
"Schedule/Control" in "Possible
schedules"[4135]
Select another schedule if needed. "To select which schedule you
currently want to use"[4135]
Program your own schedules if the
predefined schedules are not satisfactory.
The actions you can program are control
specific.
▪ "Possible actions" in "Possible
schedules"[4135]
▪ "Schedule screen:
Example"[4138]
To select which schedule you currently want to use
1 Go to the schedule for the specific control.
See "Schedule/Control" in "Possible schedules"[4135].
Example: For the schedule for the desired room temperature in
heating mode, go to [1.2] Room > Heating schedule.
2 Select the name of the current schedule.
Mon
Sat
Wed
Fri
Thu
Tue
Sun
User defined 1
3 Select Select.
Delete
Rename
Select
4 Select the schedule that you currently want to use.
Possible schedules
The table contains the following information:
▪ Schedule/Control: This column shows you where you can consult the currently
selected schedule for the specific control. If needed, you can:
- Select another schedule. See "To select which schedule you currently want to
use"[4135].
- Program your own schedule. See "Schedule screen: Example"[4138].
▪ Predefined schedules: Number of available predefined schedules in the system
for the specific control. If needed, you can program your own schedule.
▪ Activation screen: For most controls, a schedule is only effective if it activated in
its corresponding activation screen. This entry shows you where to activate it.
▪ Possible actions: Actions you can use when programming a schedule. For most
schedules, you can program up to 6 actions per day.