Daikin Altherma EHYHBH05A Series - Connections to the Indoor Unit; To Connect the Electrical Wiring to the Indoor Unit

9 | Electrical installation
Installer reference guide
117
EVLQ05+08CA + EHYHBH05A + EHYHBH/X08A + EHYKOMB33AA
Daikin Altherma hybrid heat pump
4P355634-1G – 2022.09
3×
1 2 3
6 Install the switch box cover.
9.3 Connections to the indoor unit
9.3.1 To connect the electrical wiring to the indoor unit
It is recommended to install all electrical wiring to the hydro box before installing
the boiler.
1 Wiring should enter the unit from the bottom.
2 Routing of the wiring inside the unit should be as follows:
b
a
c
a
b
c
INFORMATION
When installing field supply or option cables, foresee sufficient cable length. This will
make it possible to remove/reposition the switch box and gain access to other
components during service.