Daikin Altherma HT - Page 121

ESIE09-08B Field Setting
Test Operation 109
Check item selection (Set)
Contents display
Monitor mode
Press xx times BS2 button to select setting
Setting mode 2
(Set): Select mode with BS2 (SET button) in each selection step.
Press BS1(MODE button).
(V2762)
Press BS1
(MODE button).
Press 1 time BS3 button to enter setting
Press 1 time BS2 button to change setting
Press 1 time BS3 button to confirm setting
Press 1 time BS3 button to activate setting
Setting mode 1
(Initial condition)
Press BS3
(RETURN button).
Press BS3
(RETURN button).
Press BS1 to leave mode
(MODE button).
Press BS1 (MODE button) for more than 5 sec.
to activate setting mode 2