Installer reference guide BRC1E53
47
4P419250-1 – 2015.10
Connection diagram
22. Connection diagram
22-1 Typical layout
P1 P2
P1 P2
22-2 Typical layout for group control
0 1 2
P1 P2
P1 P2
P1 P2 P1 P2
● To be able to enable the Rotation function, group control is required.
● When using group control, every unit is automatically assigned an address (i.e. Unit Number).
In case the Rotation function is enabled, this number determines the rotation order. For
instructions on how to change the Unit Number, contact your dealer.
NOTE
To Next Page
Loading...
