15
PRODUCT IDENTIFICATION
DZ13[SA/SN]*
DZ13SA0[18-60]1AA Initial release Daikin® Brand 14 SEER single stage standard heat pumps.
DZ13SA0[18-42]1AB
DZ13SA0363AB
Reversing Valve change from Dunan to SanHua Phase 1
DZ13SA0[18-60]1
DZ13SA0[36, 48, 60]3
DZ13SA048-60]4
Changed from current four piece louver assembly to a two-piece louver plus a corner post
on 26" and 29" chassis.
DZ13SA0481AB
DZ13SA0483AB
DZ13SA0484AB
Replaced Ranco reversing valve 0151M00020 with SanHua 0151R00070 reversing valve.
DZ13SA0[36,42]1AC Change from copper wound motor to aluminum wound motor
Switching current Daikin units with vertical louvers to be consistent with other units having
horizontal louvers.
DZ13SA0484AC
DZ13SA0604AD
Replacing Motor 0131M00022 (Regal) to 0131M00783 (Nidec) where ever used.
DZ13SA0481AC
DZ13SA0601AB
DZ13SA0603AD
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
DZ13SA0[18,24,30]1AC Replaced motor 0131M000266 with 0131M00811
DZ13SA0[36,48]3AC Replaced motor 0131M00018P with 0131M00813
Change from copper wound compressor motor to aluminum wound compressor motor.
ZP34K5EPFV130 and ZP36K5EPFV130.
DZ13SA
Daikin® BRAND Z-R410A HEAT PUMP 13 SEER SINGLE STAGE A- BASE UNITS
DZ13SN0[18-60]1AA Initial release Daikin® Brand 13 SEER R-410A single stage standard heat pumps.
Changed from current four piece louver assembly to a two-piece louver plus a corner post
on 26" and 29" chassis.
DZ13SN0[18/24/30]1AB Reversing Valve change from Dunan to SanHua Phase 1
DZ13SN0481AB Reversing Valve change from Ranco 0151M00020 to SanHua 0151R00070
DZ13SN0241AC Create new Motor & Replace 0131M00294 with 0131M00800
DZ13SN0601AB Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
DZ13SN0[18,30]1AC Replaced motor 0131M000266 with 0131M00811
DZ13SN0[36,42,48]1AC Replaced motor 0131M00018P with 0131M00813
Change from copper wound compressor motor to aluminum wound compressor motor.
ZP34K5EPFV130 and ZP36K5EPFV130.
DZ13SN
Daikin® BRAND Z-R410A HEAT PUMP 13 SEER SINGLE STAGE N-NOMINAL UNITS
To Next Page
Loading...
