Daikin DAR09 - Page 17

17
PRODUCT IDENTIFICATION
DZ16SA
Model/Rev Description
DZ16SA0[24-60]1AA Initial release Daikin® Brand 16 SEER standard heat pumps with special high features.
DZ16SA0[24-60]1
Changed from current four piece louver assembly to a two-piece louver plus a corner post
on 26" and 29" chassis.
DZ16SA0601 Ultratech® compressor changes.
DZ16SA0601AB Replaced existing control panel with a tall control panel to avoid jamming of wires.
DZ16SA018-60]1BA Initial release of models (1.5- thru 5.0-ton) that meet 13 EER and 9.0+ HSPF.
DZ16SA0601BA Initial release of 5.0-ton 16SEER, 13EER with 9.0+HSPF.
DZ16SA0[24,49] 1BB
Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
DZ16SA0181BB 16 SEER 1.5T Heat Pumps, Remove Hard Start Kit
DZ16SA0[36,48]1BB Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
DZ16SA0421BB
Replaced motor 0131M00018P with 0131M00813
DZ16SA
Daikin® BRAND Z-R410A HEAT PUMP 16 SEER SPECIAL HIGH FEATURE A- BASE UNITS