EasyManua.ls Logo

Daikin EWAA011DAV3P - Using and Programming Schedules

Daikin EWAA011DAV3P
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11 | Configuration
Installer reference guide
116
EWAA011~016DA + EWYA009~016DA
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P620242-1 – 2020.06
Preset value Where used
Electricity prices
under [7.5] User
settings >
Electricity
price
Restriction: Only
applicable if
Bivalent is
enabled by the
installer.
[7.5.1] High You can use these preset values in
[7.5.4] Schedule (weekly schedule
screen for the energy prices).
See "Setting the energy prices"[4123].
[7.5.2] Medium
[7.5.3] Low
Additional to the user-defined preset values, the system also contains some
system-defined preset values that you can use when programming schedules.
Example: In [7.4.2] User settings > Quiet > Schedule (weekly schedule for
when the unit has to use which quiet mode level), you can use the following
system-defined preset values: Quiet/More quiet/Most quiet.
11.4.2 Using and programming schedules
About schedules
Depending on your system layout and installer configuration, schedules for
multiple controls may be available.
You can… See…
Set if a specific control needs to act according
to a schedule.
"Activation screen" in "Possible
schedules"[4117]
Select which schedule you currently want to use for a specific control. The system
contains some predefined schedules. You can:
Consult which schedule is currently
selected.
"Schedule/Control" in "Possible
schedules"[4117]
Select another schedule if needed. "To select which schedule you
currently want to use"[4116]
Program your own schedules if the
predefined schedules are not satisfactory.
The actions you can program are control
specific.
"Possible actions" in "Possible
schedules"[4117]
"Schedule screen:
Example"[4118]
To select which schedule you currently want to use
1 Go to the schedule for the specific control.
See "Schedule/Control" in "Possible schedules"[4117].
Example: For the schedule for the desired room temperature in
cooling mode, go to [1.3] Room > Cooling schedule.
2 Select the name of the current schedule.
Mon
Sat
Wed
Fri
Thu
Tue
Sun
User defined 1

Table of Contents

Other manuals for Daikin EWAA011DAV3P

Related product manuals