9 | Electrical installation
Installer reference guide
92
EWAA011~016DA + EWYA009~016DA
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P620242-1 – 2020.06
Installing the user interface, and connecting the user interface cable to it
You need the following user interface accessories (delivered on top of the unit):
a Front plate
b Rear plate
c Screws
d Wall plugs
1 Mount the rear plate to the wall.
▪ Use the 2 screws and wall plugs.
▪ Use any of the 6 holes. The holes are compatible with standard electrical box
extenders of 60mm.