Daikin FTKS50BVMA8 - Pcbs

Si041253_A PCBs
Removal Procedure 9
7. PCBs
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1
Remove the screw on
the electrical box.

Screw: M4 × 16
2
Push the shield plate
and unfasten the hook.
3
Press the signal
receiver unit down and
unfasten the hooks on
the upper side, and
then unfasten the hooks
on the lower side.
(R17747)
Electrical box
Shield
plate
Hook
(R13224)
(R2781)
Signal receiver
unit