Daikin FTKS50BVMA8 - Electrical Box

Si041253_A Electrical Box
Removal Procedure 7
6. Electrical Box
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1
Remove the screw and
remove the drip proof
plate.
2
Remove the screw of
the earth / ground wire.

Be careful not to lose the clip
for the thermistor.

Some models do not have a
wire fixture.
3
Pull out the indoor heat
exchanger thermistor.
4
5
Remove the screw of
the wire fixture.
Remove the 4 screws
of the connecting wires.
6
Disconnect the
connector [S1].
[S1]: fan motor
Drip proof plate
(R5346)
(R18514)
Earth / ground wire
Connecting
wire
Wire fixture
Indoor heat exchanger
thermistor
Clip
(R11234)
(R2774)
[S1]