Si041253_A Horizontal Blades
Removal Procedure 5
4. Horizontal Blades
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1
Open the horizontal
blades.
2
Bend the horizontal
blade (lower) slightly
and release the left
shaft and the center
shaft.
3
Slide the horizontal
blades (lower) the left
and release the right
shaft.
Installation procedure
1. Since the key pattern hook is
provided, rotate the blade
and fit it to the right shaft
first.
2. Fit the blade to the center
and left shafts.
4
Remove the horizontal
blade (upper) in the
same way.
Horizontal blades
(R17899)
(R17900)
Left shaft
Center shaft
(R17901)
(R2766)
Right shaft
To Next Page
Loading...
