Daikin FTKS50BVMA8 - Front Panel

Si041253_A Front Panel
Removal Procedure 3
2. Front Panel
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1
Open the front panel
over the position where
it stops.

When reassembling the front
panel, fit the right and left
rotary shafts one by one into
the grooves and fully push
them in position.
2
Slide the left rotary
shaft to the right and
release it.
3
Remove the right rotary
shaft in the same way.
(R17898)