5 | Operation
User Reference Guide
20
FTXP20~35M5V1B9
Daikin room air conditioners
4D520466-7C – 2020.03
4 Press to stop operation.
Result: disappears from the LCD.
Result: The operation lamp goes off.
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Heating
: Operation mode = Cooling
: Operation mode = Fan only
: Shows the set temperature.
5 Start operation by pressing one of the following buttons.
Mode Press Result
Automatic operation
The operation lamp lights up.
Cooling operation
Drying operation
Heating operation
Fan only operation
6 Press or on the button one or more times to set the temperature.
You CANNOT adjust the temperature in drying or fan only operation mode.
Cooling operation Heating operation Automatic
operation
Drying or fan only
operation
18~32°C 10~30°C 18~30°C —
7 Press to stop operation.
Result: The operation lamp goes off.
5.4 Airflow rate
1 Press to choose:
5 airflow rate levels, from " " to " "
Automatic operation
Indoor unit quiet operation. When the airflow is set to " ", the
noise from the unit will be reduced.
INFORMATION
▪ If the unit reach the temperature setpoint in cooling, heating or automatic mode.
Fan will stop operating.
▪ When using drying operation mode, you CANNOT adjust the airflow rate setting.
To Next Page
Loading...
