5 | Operation
User Reference Guide
25
FTXP20~35M5V1B9
Daikin room air conditioners
4D520466-7C – 2020.03
5.8 Econo operation
This is a function which enables efficient operation by limiting the maximum power
consumption value. This function is useful for cases in which attention should be
paid to ensure a circuit breaker will not trip when the product runs alongside other
appliances.
INFORMATION
▪ Powerful and Econo operation CANNOT be used at the same time. The last
selected function takes priority.
▪ Econo operation reduces power consumption of the outdoor unit by limiting the
rotation speed of the compressor. If power consumption is already low, Econo
operation will NOT further reduce power consumption.
5.8.1 To start/stop Econo operation
1 Press to start.
Result: is displayed on the LCD.
2 Press to stop.
Result: disappears from the LCD.
A Running current and power consumption
B Time
a Maximum during normal operation
b Maximum during Econo operation
c Normal operation
d Econo operation
▪ The diagram is for illustrative purposes only.
▪ The maximum running current and power consumption of the air conditioner in
Econo operation varies with the connected outdoor unit.
5.9 OFF/ON timer operation
Timer functions are useful for automatically switching the air conditioner on/off at
night or in the morning. You can also use OFF timer and ON timer in combination.
INFORMATION
Program the timer again in case of:
▪ A breaker has turned the unit off.
▪ A power failure.
▪ After replacing batteries in the user interface.
To Next Page
Loading...
