Daikin MCK70ZVM-W User Manual

11
Names of Parts and Operations
Read First
AIR MONITOR setting lamps (white)
Indicate the Air monitor setting.
• μg/m
3
(PM2.5 concentration)
• °C (current indoor temperature)
• % (current indoor humidity)
AIR MONITOR button
Allows you to change the item you want to monitor
in the air (PM2.5, temperature, or humidity).
Child proof lock
Hold down for about 2seconds to set.
(The same applies when you want to cancel.)
Child proof lock lamp (white)
Lamp will be lit when the child proof lock is active. When lit
up, operations will be restricted. When buttons are pressed,
only a tone (3short beeps) will sound, preventing
misoperation by small children.
Attention
If the unit is unplugged when Child proof lock is active, Child
proof lock is turned off.
Operating / Indicator panel
Humidity setting lamps (white)
Indicate the humidity setting in 3 levels (Low, Standard,
High).
Humidier lamp (white)
Lights up during Humidifying Operation
Setting.
• Slowly blinks during humidifying lter
drying operation.
► Page 24
BRIGHTNESS button
During operation, each press cycles through operating panel lamp brightness levels.
BRIGHT OFFDIM
Use this function if the lamps bother you during sleep hours, etc.
• The following lamps do not turn off even if the brightness is set to OFF.
“AUTO operation lamp, MODE lamp, FAN lamp, Humidier lamp, Humidity setting lamps, Child proof lock lamp, Communication lamp, Water
supply lamp”
01_EN_3P693798-1B.indd 11 2023/06/26 13:33:58

Daikin MCK70ZVM-W Specifications

General

Brand	Daikin
Model	MCK70ZVM-W
Category	Air Cleaner
Language	English