Be sure to operate with the dust collection lter and deodorising lter attached.
Dust collection lter
Replace
Replace about every 10 years
About part replacement timing
• Replacement timing depends on usage patterns and the
location of the unit.
Standard replacement time is about 10 years assuming
that the unit is used daily in a home where 5 cigarettes
are smoked a day. (Calculation in accordance with testing
method of Japan Electrical Manufacturers’ Association
JEM1467 standard)
If the impurity content of the ambient air is high, the lter
will need more frequent replacement.
If the lter is failing to perform, it is time to replace it.
About purchasing and disposal
¼ Refer to “Separately Sold Parts”.
►
Page 56
1. Remove the water tank.
►
Page 17
2. Remove the humidifying tray.
►
Page 15
3. Remove the lter xing unit.
►
Page 15
4. Remove the deodorising lter.
Hold the side of the lter and remove it.
Deodorising lter
5. Remove the dust collection lter.
1
Pull the lter tag upward.
2
Hold the lower part of the dust collection lter and
lift it out.
Dust collection lter
6. Attach a new dust collection lter.
• If it is hard to install, push the dust collection lter
while installing.
Side with tag and
markings should face
toward you and arrow
should point up
7. Attach the deodorising lter.
►
Page 15
8. Attach the lter xing unit.
►
Page 15
9. Attach the humidifying tray.
►
Page 39
10
. Put the water tank in.
►
Page 17
To Next Page
