Dalla Corte ICON - Alarm Table

5
38
BREAKDOWN INFORMATION
Alarm table
Alarm messages Likely cause Remedy
Data loss
Loss of data set during installation
Touch the DEL key on the display to clear
the alarm
The machine is working with the factory
settings
Clock failure The timer switches o󰀨 automatically
Touch the DEL key on the display to clear
the alarm
If the alarm recurs, contact the manufac-
turer’s technical service department
24v Alarm
The 24v electricity supply cuts out
Turn the machine o󰀨 and on again using
the main switch
If the alarm recurs, contact the manufac-
turer’s technical service department
Machine locked
CPU serial port failure
Interruption of data transmission between
circuit boards
Turn the machine o󰀨 and on again using
the main switch
If the alarm recurs, contact the manufac-
turer’s technical service department
Machine locked
Grinder serial port failure
Interruption of data transmission between
the machine and the grinder
Touch the DEL key on the display to clear
the alarm
If the alarm recurs, contact the manufac-
turer’s technical service department
Automatic co󰀨ee grinder adjustment
locked
The machine is equipped with an electronic system that
manages the operating features and checks that the ma-
chine components are working properly.
Any malfunctions are shown on the control terminal dis-
play.
Some alarms can only be displayed but not stored in the
system because they are not signicant for operating safe-
ty purposes.