49
6
CLEANING AND MAINTENANCE INFORMATION
Cleaning the external surfaces of the machine
Clean the external surfaces of the machine with a soft
damp cloth (only water, no detergents).
Be careful with the surfaces (stainless steel, aluminium), in
particular the painted parts.
Cleaning the boiler
NOTICE
The groupheads and the boiler must not be cleaned at the same
time.
Cleaning is only allowed if the groupheads in question have
reached the set operating temperature.
Do not use corrosive cleaning products.
Do not use abrasive material or sharp tools to remove li-
mescale.
Carry out the operations described.
WARNING
To ensure proper hygiene and protect the drinks from impuri-
ties, do not interrupt the cleaning.
If the cleaning is interrupted, for example due to a power fail-
ure, repeat the cleaning instructions from the start to ensure
drink hygiene and safety.
1) Unscrew the endpiece (A).
2) Remove the lter (B).
3) Remove the seal (C).
4) Tighten the tting (D) supplied.
5) Insert the heat-resistant hose supplied into
the tting.
To Next Page
Loading...
