Dalla Corte ICON - Page 47

45
6
CLEANING AND MAINTENANCE INFORMATION
Cleaning the hot water sprinkler and the hot water sprinkler holder
Carry out the operations described.
1) Unscrew the screw (A).
2) Remove the hot water sprinkler (B).
3) Remove the hot water sprinkler holder (C).
4) Immerse the hot water sprinkler and the hot wa-
ter sprinkler in a warm solution of drinking water and
foodgrade detergent.
5) Brush and rinse the hot water sprinkler thoroughly to
remove co󰀨ee and detergent residues.
6) Carefully brush the hot water sprinkler holder and the
area where the portalter is inserted into the group-
head.
7) Position the hot water sprinkler holder in the grouphead
seat.
8) Ret the hot water sprinkler.
9) Tighten the screw (A).
NOTICE
Do not overtighten the screw as this could damage it.
WARNING
Allow the grouphead to cool in order to prevent scalds
or burns.