Web Remote interface
Password dialog
Once the device is locked with a password, the Web Remote
interface is also locked and can no longer be accessed.
A corresponding dialog will pop up to allow you to unlock the
device.
Event log tab
The «Event log» stores a maximum of 10000 records. Once the
maximum number of records is reached, the system starts deleting
the first ones Þ Ring buffer.
The number of records displayed depends on the size of the
browser window.
Located on the right-hand side of the record list
are various Navigation buttons allowing you
to scroll through the list using the
«Page Up/Down» or «Line Up/Down» buttons
or by directly jumping to the «Latest» record.
In addition, the editable «Record» field allows
you to enter a dedicated record number. The
corresponding record will be displayed at the
very bottom of the record list.
Storage option ( )
In addition, a storage option is provided which allows you to store
the Event log data locally. This is mainly intended for service
and/or troubleshooting purposes.
To save the Event log data locally, proceed as follows:
1. Select the «Save» button at the bottom right corner of the web
browser window.
↳
A corresponding dialog will pop up providing you with a
drop-down list from which you can select either the number
(«Last [n]») of records or «All» records to be saved.
2. Choose the desired option from the drop-down list and select
«Save».
↳
The event log data will be downloaded and the download
progress will be displayed.
Once the download is completed, a corresponding
message will be displayed.
3. Select «Save» to store the Event log data locally.
↳
Your web browser will display the corresponding dialog
and the file will be saved as Event.log to the local
download directory you have specified in the download
settings of your browser.
Commands tab
This functionality is intended for service purposes only.
d&b 40D Reference manual 1.3 en 29
To Next Page
Loading...
