57
Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11
57
Locomotive/Locomotive function decoder from firmware version 3.12
Please make sure that the function output you have chosen for connecting the electric coupling has a sufficiently high
capacity! We recommend the connections AUX3 and AUX4 of our decoders, which are designed for currents up to 1 A.
Hint:
Use the coupling functions of our decoders (timer for switching off AUX*) to make sure that the function output will be
switched off in any case according to a maximum activation time specified by you. Otherwise the destruction of the electric
coupling is possible.
Refer to automatic coupling prcedure.
BA DH engl FW3_12 Druck.indd 57BA DH engl FW3_12 Druck.indd 57 10.05.21 14:2710.05.21 14:27
To Next Page
Loading...
